StoreSync blog

Coffee Shop Inventory Count: Weighing Open Bean Bags

How coffee shops count open bags of beans by weight: tare a container, weigh in grams, subtract, and total. A worked three-shop example and a repeatable weekly routine.

By Jared · 2026-11-20 · 7 min read

To count open bags of beans by weight, put an empty container on a gram scale, press tare, pour in the beans, and record the net grams. That number goes on your count sheet instead of "about half a bag." Do it for every open bag, in the same unit, at the same time each week, and your coffee shop inventory count stops drifting.

Eyeballing works for milk jugs and sleeves of cups. It fails on beans. A bag that looks half full can hold anywhere from a third to two thirds of its contents, depending on how it's rolled, folded or slumped against a shelf. Multiply that error across five or six coffees and three shops, and your ordering is built on guesses.

This guide is the manual method we use as operators of Kinos Coffee: what to buy, how to tare, a worked example with five bags, and how to keep every shift counting the same way.

Why open bean bags break a coffee shop inventory count

Open bean bags break a count because visual estimates on partial bags routinely lead to significant errors. Full bags are easy: you count them. Open bags aren't countable, so people round to quarters and halves.

The problem compounds three ways. First, different people estimate differently. One barista says a bag is half, another says a third. Second, you're rounding a high-cost item. Beans are usually the most expensive ingredient in a drink, so small errors carry real dollars. Third, rounded counts hide usage. If last week's open bag was "half" and this week's is "half," it looks like nothing was used, when a pound may have gone through the grinder.

A better eye won't fix this. A scale will. Grams don't have opinions.

What you need: a gram scale, a tare container and one unit

You need three things: a scale that reads in grams, a container you can dedicate to weighing, and a decision to record everything in grams. That's the whole kit.

Pick a scale that reads at least 5 kilograms with 1 gram resolution. Any basic digital kitchen scale does this. Skip scales that only show ounces or pounds-and-ounces, because mixed units cause most counting errors.

Pick a tare container. A clean stainless steel bowl or a lidless deli container works. Keep it by the scale so it's always the same one. Tare means zeroing the scale with the empty container on it, so the display shows only what you add. Pressing tare changes the display, not the container's real weight, which matters if you ever weigh a bag still inside its packaging.

Pick one unit: grams. Don't use ounces for one coffee and pounds for another. A 12 oz retail bag is about 340 g, a 2 lb bag is about 907 g, a 5 lb bag is about 2,268 g. Convert the labeled size of your unopened bags to grams once, write it on a card, and tape it next to the scale.

How to weigh an open bag of beans, step by step

Weigh the beans, not the bag, whenever you can. Pouring into a tared container gives you net weight directly and removes any guess about packaging.

  1. Place the empty container on the scale and press tare. The display reads 0 g.

  2. Pour the beans from the open bag into the container. Shake the last few beans out of the bag.

  3. Read the display and write down the net grams next to that coffee's name.

  4. Pour the beans back into the bag or hopper-ready container, and reset for the next bag.

If you can't pour, because a bag is clipped and in use, weigh it with the bag instead. Weigh one empty bag of that same type once, write down its tare weight, then subtract it from the gross reading: gross grams minus empty-bag grams equals bean grams. Do this per bag size, since a 5 lb bag weighs more empty than a 12 oz bag.

What about the grinder hopper? Treat it as its own line. Either weigh the hopper contents with the same pour-and-tare method, or set a rule such as "hoppers are not counted; we count at close after hoppers are emptied back into bags." Pick one rule and write it on the count sheet.

Worked example: counting five bags by hand

Here's a hypothetical count for one shop with five open bags and a few unopened ones. Unopened bags are counted by the labeled size, converted to grams.

Coffee Open bag net (g) Unopened bags Unopened grams Total on hand (g)
House blend (2 lb bags, 907 g) 742 2 1,814 2,556
Espresso (5 lb bags, 2,268 g) 1,130 1 2,268 3,398
Decaf (12 oz bags, 340 g) 215 1 340 555
Single origin A (12 oz, 340 g) 98 0 0 98
Single origin B (12 oz, 340 g) 301 2 680 981

Look at what the scale caught. The espresso bag that looked "about half" held 1,130 g, a bit under half of 2,268. Single origin A looked "almost gone" and held 98 g, enough for roughly five double shots at an 18 g dose, but not enough to survive a busy Saturday. Eyeballing would have rounded both.

Now the three-shop version. Run the same sheet at each shop, same coffees, same grams. If shop one shows 2,556 g of house blend, shop two shows 1,300 g and shop three shows 3,900 g, you can see in one glance which shop to transfer from and which to order for. Our two-shop transfer log shows how to record that move so both counts stay honest.

Keeping counts consistent across shifts and shops

Consistency beats precision. A count that's off by 10 grams every week in the same way is far more useful than a perfect count taken at random times.

Fix the timing. Count at close, after the last drink, on the same day each week. Counting mid-rush means beans are in the hopper, on the bar and in a bag that was just opened.

Fix the sequence. Write the coffees on the sheet in shelf order so nobody skips one. List unopened bags first, then open bags.

Fix the owner. One named person per shop does the bean count each week. Rotating the job rotates the habits.

Fix the equipment. Same scale model, same tare container, same grams-only rule at every location. If one shop's scale reads in ounces, the sheet isn't comparable.

Check the scale monthly. Place a known weight on it, such as a sealed 12 oz retail bag at 340 g, and confirm it reads close. Replace the batteries before they get weak, since low batteries drift readings.

Recount anything that looks wrong. If a bag shows more than last week with no delivery logged, weigh it again before you record it.

From weights to ordering: using the count with par levels and usage

Weights turn into orders through two numbers: weekly usage and par level. Usage is last week's count, plus deliveries received, minus this week's count. Par is the amount you want on hand right after a delivery.

Take the house blend from the example. If you started the week with 4,000 g, received 1,814 g, and ended with 2,556 g, you used 3,258 g. That's roughly 3.3 kg a week for that coffee. If you order every week and want to land at a par of 5,000 g, you order enough bags to bring 2,556 g back up to about 5,000 g. That's three 2 lb bags (2,721 g), giving 5,277 g.

Repeat the same weekly math and you get a usage trend per coffee. A spreadsheet works fine for this: one row per coffee, columns for start, received, end, and used. Once you see usage, you can set par levels from data. Our par level worksheet walks through delivery-day ordering, and the weekly food cost variance worksheet shows how to compare what you used against what you sold.

If you want inventory, recipe costing and operations for Square shops in one login instead of a spreadsheet per shop, that's what StoreSync does: operations software for Square coffee and restaurant shops covering inventory, recipe costing, scheduling, checklists, labor reporting and kitchen display. The weighing stays manual with your scale. The numbers you write down are what carry into inventory.

Start with one scale, one unit and one shop this week

Open bean bags are the one item where "about half" costs you real money, and a $20 scale fixes it. Weigh in grams, tare the container, count at close, and the guesswork leaves your coffee shop inventory count. Run the five-bag sheet at one shop this week, then copy it to the others. When you're ready to keep inventory, recipe costing and operations together for your Square shops, book a demo of StoreSync at getstoresync.com/demo.

Common questions

How do coffee shops count open bags of beans by weight?

They set a gram scale to zero with an empty container on it (tare), pour the open bag's beans in, and record the net grams. If the bag stays on the scale, they subtract the empty bag's weight from the gross reading. Totals are kept in grams so open and unopened bags can be added together.

How do I subtract tare weight when weighing a bag?

Weigh one empty bag of the same type and size, write down its grams, and subtract that from the gross weight of any open bag. For example, a 1,000 g gross reading minus a 20 g empty bag gives 980 g of beans. Better still, pour beans into a tared container and read net weight directly.

How to do inventory for a coffee shop?

Count at the same time each week, preferably after close, using a fixed sheet listed in shelf order. Count unopened items by the case or bag, weigh open bags in grams, and recount anything unusual. Then compare to last week to find usage. StoreSync handles inventory and recipe costing for Square shops in one login.

What unit should I use to track coffee bean inventory?

Use grams for everything. Convert unopened bag sizes once (12 oz is about 340 g, 2 lb about 907 g, 5 lb about 2,268 g) and keep that card by the scale. A single unit lets open and unopened bags add up cleanly and makes usage comparable across coffees and shops.

Can I track bean usage in a spreadsheet?

Yes. Use one row per coffee with columns for starting grams, received grams, ending grams and used grams, where used equals start plus received minus end. Keep one tab per shop. Once usage is visible, set par levels from it. Shops that outgrow separate sheets can move counts into StoreSync.